1. Lube & Fuel Oxidation
Oxidation of engine oil produces harmful sludge that can reduce engine cooling, accelerate component wear and plug passages necessary for proper oil circulation and lubrication. Abrasive material then accumulates within the engine, which can destroy bearings and promote seal leakage. Likewise, oxidative by-products of fuel reduce the volumetric efficiency of fuel pumps and filters, and can result in costly fuel injector failure. Higher tailpipe emissions and poor fuel economy always follow in the footsteps of damaging fuel deposits.
2. Diesel Injection Clogging
Heavy carbon residues build up on fuel injectors, thus reducing their optimal efficiency. This leads to a poor fuel spray pattern, reduced injector cooling and flow, and inefficient combustion. If left unattended, this condition can rob an engine of power and will produce excess exhaust gas smoke, poor power and fuel economy and shortened injector life.
3. Drive Line Abrasion
Rear differential ring and pinion gears can suffer scoring, fretting and pitting due to lack of lubrication and corrosion. Stress cracks may develop that serve to weaken the gear surface and promote further damage. Also, excessive gear and bearing noise may indicate that abrasive metallic wear is occurring within your gear set. Progressive gear wear within this unit will have a negative effect on seals, causing fluid leakage.
4. Fuel/Air Induction Carbon
Gummy residues derived from residual fuel vapors have a tendency to accumulate within the air intake (plenum) over time. These deposits restrict air flow and disrupt combustion air swirl and dispersal. This all serves to decrease engine efficiency and fuel economy. Engine devices like MAF sensors, Idle Air Controllers and critical throttle plate clearances are also impeded by these gummy deposits.
5. Transmission Sludge
Transmissions operate under widely adverse conditions and expose the transmission fluid to wide swings in temperature. As Automatic Transmission Fluid (ATF) ages, it forms sludge, which reduces fluid circulation and transmission cooling. Abrasive metal particles generated from aged ATF will ruin seals and cause irreversible damage to internal transmission components. A customer may eventually experience erratic shifting, excessive vibration or noise, or even transmission failure.
6. Power Steering Debris
High pressure power steering units require excellent lubricants to function properly. Damage to gears, seals, O-rings, bearings and bushings, and spool valves are dramatically increased by poor quality lubricants. Critical brass and other soft alloys rely on the proper balance of lubricant additives to ensure long power steering life and trouble-free operation.
7. Cooling System Scale
Minerals found in tap water have the tendency of combining with the additives found in automotive coolant. When this happens, they form a chemical complex called “phosphate scale,” which coats the heat transfer surfaces of the radiator and heads, resulting in decreased heat-transfer efficiency. When this occurs, your car will overheat and run much hotter than it was designed to. This scale can also lead to the destruction of water pump bearings.
8. Brake Fluid Moisture Contamination
The gradual deterioration of brake fluid over time happens by exposure to heat, pressure, and moisture contamination. As the brake fluid additives deplete, the fluid breaks down at an increased rate, resulting in corrosion of brake parts, poor compressibility and eventual loss of brake function.
9. Climate Control Mold
Mildew, mold and spores can inhabit your automotive climate control system. The presence of moisture in air conditioning ducts is common since the air leaving the air conditioner evaporator is saturated with it. Air conditioning used continuously during hot weather provides little time for ducts to dry out. High moisture in ducts can cake with dirt and provide an environment for mold to grow. This situation leads to serious indoor air contamination problems, resulting in symptoms of illness such as headaches, watery eno, nausea, skin disorders and fatigue.
10. Battery Corrosion
Slower than normal cranking may be a sign that your battery is holding less than it’s optimal electric charge. Oxidation of the battery terminals and build-up of exterior dirt and corrosion accelerate the loss of current through the case of the battery, thus prematurely discharging it.